JANUS 2020 Hand-Held Computer User's Manual
Scanner Trigger
Purpose:
Scanner trigger allows you to set level triggering or edge triggering.
• With level triggering, you pull the trigger and the laser turns on and stays
• In edge triggering, you pull the trigger and the laser turns on and stays on.
Default:
Level triggering
Syntax:
SCdata
Acceptable values for data are:
0
1
One of these bar codes:
Scan:
Enable Level Triggering
*$+SC0*
*$+SC0*
Enable Edge Triggering
*$+SC1*
*$+SC1*
12-88
on until you release the trigger.
When you pull the trigger a second time, the laser turns off. Simply
releasing the trigger does not turn the laser off. If the laser is left on, the
scanner timeout turns the laser off.
Level triggering
Edge triggering
BC
N F