Code 49 - Intermec Janus 2020 User Manual

Intermec janus 2020: user guide

Hide thumbs Also See for Janus 2020:

Table of Contents

Code 49

Enables or disables decoding of Code 49 symbology. Code 49 is a multirow

symbology for high data density. The last character in each row is used for row

checking and the last two characters of the symbol are used for overall

Function codes designate where to place the predefined data string in a Code

49 label. Whenever a reader encounters a function code, it replaces the function

code with the defined string before transmitting the data to the workstation. A

single Code 49 symbol may contain several different variable length data fields.

Function Code 1 (F1) identifies a data system. Function Code 2 (F2) indicates

the end of a data field.

Code 49 Enabled, Function Code 1 disabled, Function Code 2 set to CR LF, and

Function Code 3 disabled.

Acceptable values for data are:

Function Code 1:

Function Code 2:

Function Code 3:

One of these bar codes:

Disable Code 49

To disable any of the function codes, scan one of these bar codes:

Disable Function Code 1

Configuration Command Reference

Function Code 1

Function Code 2

Function Code 3

Any two ASCII characters.

Any four ASCII characters

Any two ASCII characters

Enable Code 49

Disable Function Code 2