Address, Multi-Drop - Intermec Janus 2020 User Manual

Address, Multi-Drop

Purpose: Defines the address of the communications port when you are using the
Multi-Drop communications protocol. Each multi-drop address has unique
POL and SEL characters that are automatically set when you configure the
address. For help, see "POL and SEL Combinations for Multi-Drop Protocol" in
Appendix C.
Note: You must select the communications port and protocol before you can set the
parameters to define that protocol. For help, see "Communications Protocol,
Configure" later in this chapter.
A
Default:
Syntax: HCdata
where data can be A through Z or 0 through 5.
Scan: 1. Scan this bar code:
2. Scan a bar code for data from the "Full ASCII Bar Code Chart" in
3. Scan this bar code:
NF
Enter Accumulate Mode / Change Address
*+/$+HC*
*+/$+HC*
Appendix C.
Exit Accumulate Mode
*-/*
*-/*
BC
Configuration Command Reference
12
12-7