Intermec Janus 2020 User Manual page 404

JANUS 2020 Hand-Held Computer User's Manual
EOM (continued)
2. Scan one or two bar codes for data from the "Full ASCII Bar Code Chart" in
3. Scan this bar code:
Or: To set EOM Transmit and Receive to different ASCII characters:
Note: You can enable an EOM Transmit character and disable the EOM Receive
character, or vice versa.
1. Scan this bar code to set the EOM Transmit character:
2. Scan one or two bar codes for data from the "Full ASCII Bar Code Chart" in
3. Scan this bar code:
4. Scan this bar code to set the EOM Receive character:
5. Scan one or two bar codes for data from the "Full ASCII Bar Code Chart" in
6. Scan this bar code:
12-54
Appendix C.
Exit Accumulate Mode
*-/*
*-/*
Enter Accumulate Mode / Enable EOM Transmit Only
*+/$+PI*
*+/$+PI*
Appendix C.
Exit Accumulate Mode
*-/*
*-/*
Enter Accumulate Mode / Enable EOM Receive Only
*+/$+PJ*
*+/$+PJ*
Appendix C.
Exit Accumulate Mode
*-/*
*-/*
BC
N F