Intermec Janus 2020 User Manual page 512

Intermec janus 2020: user guide

Hide thumbs Also See for Janus 2020:

Table of Contents

JANUS 2020 Hand-Held Computer User's Manual

INTERLNK.EXE (continued)

Notes: (cont.)

Limitations These commands do not work on devices running Interlnk:

Interlnk does not redirect network, CD-ROM drives, or any other device that

uses a redirection interface. For example, you cannot access a network drive

that was redirected before Interlnk was started.

If the Interlnk files are located in the INTERLNK directory on the host

computer's drive C and you need to specify seven drives so that drives C

through G on the reader will be redirected, add this line to the CONFIG.SYS

file on the reader:

device=c:\interlnk\interlnk.exe /drives:7

If the Interlnk files are located in the root directory on drive D of the reader,

you used the serial port to connect to another computer, and you want to

start Interlnk without having the printers redirected, add this line to the

CONFIG.SYS file on the reader:

device=d:\interlnk.exe /com /noprinter /drives:7

To make Interlnk use a non-standard COM port whose address is 3F8, add

this line to your CONFIG.SYS file on the reader:

device=d:\interlnk.exe /com:3F8 /drives:7