5-16
Remote Maintenance
Overview
The Remote Maintenance feature allows authorized personnel to survey
system and slot configuration information. This can be done through a
modem or data terminal connected via the RS-232C port on the MPB, SIU
or SIU2 Module. The commands are entered from a keyboard and are
limited to those listed.
Overview of Maintenance Commands
There are four basic commands available in the Remote Maintenance
feature. All commands begin with a single character, followed by a space,
another character and an optional digit or digits. All commands are
terminated with the <
Maintenance Password
The Remote Maintenance feature, like Remote Programming, is entered
via a six-character alphanumeric string. The password prompt is given by
depressing the <
Module port. After the prompt is printed out, the password should be
entered followed by the <
the maintenance prompt. The Remote Maintenance password
is: {CONFIG}
r>
key.
r>
key at the device connected to the SIU or SIU2
r>
key. Proper entry of the password results in
Remote Maintenance