Using The Stack Bypass - Canon CLC5151 Copying And Mail Box Manual

Using the Stack Bypass

You can perform reserved copying from the stack bypass by specifying in advance the paper to
be loaded for the next job. However, this is possible only if paper is being fed from the stack
bypass for the current job.
The following example assumes that A3 plain paper is being fed from the stack bypass for the
current job, and that you are selecting A4 plain paper to be fed from the stack bypass for a
1
reserved job.
IMPORTANT
When printing on special types of paper, such as heavy paper or transparencies, be sure to correctly set
the paper type, especially if you are using heavy paper. If the type of paper is not set correctly, it could
adversely affect the quality of the image. Moreover, the fixing unit may become dirty, or the paper could
jam, and a service repair may be needed.
NOTE
• If Stack Bypass Standard Settings in Common Settings (from the Additional Functions screen) is set to
'On', reserved copying can be performed only for the registered paper size and type. (See Chapter 4,
"Customizing Settings," in the Reference Guide.)
• For more information on paper types, see Chapter 2, "Basic Operations," in the Reference Guide.
• For instructions on entering values in inches, see Chapter 2, "Basic Operations," in the Reference
Guide.
1
1-22
Reserved Copying
Press [Done] on the pop-up screen that appears while the machine is
printing.
If the job displayed on the touch panel display is from a function other than the Copy function,
press [Done] [Copy] to display the Regular Copy Basic Features screen.