Olympus FLUOVIEW FV1000 User Manual page 95

3) Click the <Apply> button to apply the selected dyeing method to the [Ch] group box
on the upper part of the [Acquire] panel.
TIP
When the dyeing method is selected from the [Available Dyes] list box and the
<Apply> button is clicked, a channel for acquiring fluorescence is set
automatically according to the changed filter. And the dyeing method is shown
in the [Ch] group box.
The Confocal Aperture value is also set automatically according to the
wavelength and the objective per channels.
TIP
If you switch the objective, click the <Apply> button in the [Dyes] sub panel. The
Confocal Aperture value is set appropriately.
For detailes, see section 1-3-2-6 "Setting the Filters" for automatic Confocal
Aperture setting with switching the objective.
APPLIED OPERATIONS
OPERATION INSTRUCTIONS
Page
/Image Acquisition
2 - 1 1