Olympus FLUOVIEW FV1000 User Manual page 245

Confocal laser scanning biological microscope

Hide thumbs Also See for FLUOVIEW FV1000:

Table of Contents

Filter [NORMAL

/KALMAN/PEAK]

Gain ch, value

[ ,Ch(s)][ ,Ch(s)]

Message message

APPLIED OPERATIONS

designated is to be Valid, select ON and, in

case that Invalid is to be set, select OFF.

<E.g> In case that channel 1 is to be Valid,

enter [EnCh1, ON].

[NORMAL/KALMAN/PEAK]: It defines type of

integration.

NORMAL: No integration

KALMAN: KALMAN filter

PEAK: Peak detecting integration

value: In case that KALMAN is selected,

integration cycle of KALMAN filter is set and,

in case of PEAK, max. addition cycle at PEAK

integration is set. In case that NORMAL is

selected, no setting is required.

<E.g> In case that integration is required 4

times, using KALMAN filter, enter [Filter

Sets the Gain value of channel.

<E.g.> Enter "Gain 2, 50" to set 50 to Gain of

[LivePlot OFF], LivePlot is not

displayed. (This is TIEMPO option.)

Merges image data that is located under

FLUOVIEW software.

The following example is to merge 2ch of File1

and 3ch of File2.

[Merge C:¥FLUOVIEW¥Images

¥File1,C:¥FLUOVIEW¥Images¥File2,2,3]

Displays a message to suspend executing a

OPERATION INSTRUCTIONS

/Protocol processor

Chapters

Table of Contents