Olympus FLUOVIEW FV1000 User Manual page 246

APPLIED OPERATIONS
OPERATION INSTRUCTIONS
Page
2 - 1 6 2
/ Protocol processor
Command Entry form
Offset ch value
Offset
PasteROI PasteROI
Pause
Pause
ReceiveCOM
ReceiveCOM
message
Save Save
SendCOM
SendCOM
message [ ,0/1]
Size X,
Size
protocol.
Sets the Offset value of channel.
<E.g.> Enter "Offset 2, 5" to set 5 to the offset
value of channel 2.
Pastes ROI to the next track.
Note: Before the paste, Normal scan is
executed one time.
Suspends executing a protocol.
Receives RS-232C command from other PC.
The following data returns after command is
executed.
Completes
characters
Ends with error: "NG" + Received characters.
For further details, see 2-4-7.
Saves whole series of images.
Sends data through RS-232C to other PC.
The following data has to be returned in
synchronous mode,.
Completed normally: "OK" + sent characters
Ends with error: "NG" + sent characters
For further details, see 2-4-7.
Y
Sets the image size in pixel.
<E.g.> Enter "Size 512, 512" to set 512X512 to
the image size.
Note: The images acquired before and after
executing the Size command cannot be
saved together. In the previous or
succeeding track, execute the Save,
Store, or Stop&Save command to save
the images acquired.
Note) Image size can be set at the following
Description
normally: "OK" + Received