Olympus FLUOVIEW FV1000 User Manual page 212

APPLIED OPERATIONS
/Saving, Opening and Shredding Images
Saving a channel under
displayed condition
(Example: When only Ch3
is displayed)
Display channel switch buttons
Single TIF(s) 16-bit 12 images obtained by
merging Ch1, Ch2 and Ch3
images are saved.
abcdefgh0.tif
abcdefgh3.tif
abcdefgh4.tif
abcdefgh7.tif
abcdefgh8.tif
abcdefgh11.tif
NOTE
OPERATION INSTRUCTIONS
Page
2 - 1 2 8
Saving merged images
(Example: When Ch1, Ch2
and Ch3 are displayed)
Display channel switch buttons
4 images are saved only
from Ch3.
Save file names:
Save file names: abcdefgh0.tif
|
abcdefgh3.tif
| (Ch1: No. 0)
(Ch1: No. 3)
| (Ch2: No. 0)
(Ch2: No. 3)
| (Ch3: No. 0)
(Ch3: No. 3)
All single TIF(s) 16-bit (*.tif) data is saved as gray scale images.
Saving side-by-side
Over and Under
Display channel switch buttons
12 images are saved from
each of Ch1, Ch2 and Ch3.
Save file names:
abcdefgh0.tif
(Ch3: No. 0) |
abcdefgh3.tif
(Ch3: No. 3)
abcdefgh4.tif
|
abcdefgh7.tif
abcdefgh8.tif
|
abcdefgh11.tif
Saving extended image
or
Z/T series switch button
images
The image is saved in the
selected channel condition.
Note that a file does not
always contain the
corresponding number of
(Ch1: No. 0)
channels.
(See "Saving a channel
(Ch1: No. 3)
under displayed condition",
(Ch2: No. 0)
"Side-by-side images" and
"Merged images" on the
(Ch2: No. 3)
left.)
(Ch3: No. 0) The image is saved in the
original, non-extended
(Ch3: No. 3)
status.
Comment
drawn on
images
Not to be
saved.