Olympus FLUOVIEW FV1000 User Manual page 39

Confocal laser scanning biological microscope

Hide thumbs Also See for FLUOVIEW FV1000:

Table of Contents

When only fluorescence observation is required, disengage the transmitted DIC slider

(3) by setting the switch to the pulled-out position. When transmitted light differential

interference observation or simultaneous fluorescence + transmitted light differential

interference observation is required, engage the transmitted DIC slider and the optimum

transmitted light DIC for the objective in the light path by operating the universal

condenser (5).

(1) Cube display window

(2) Analyzer

(3) Transmitted light DIC slider

(5) Universal condenser

Getting Started FLUOVIEW/

For transmitted light observation, disengage any filter (4) from the light path.

When you perform transmitted observation using laser with BX61WI, use the filter knob

to disengage the LBD from the light path and engage the FR (Frost) into the light path.

Disengaging the FR (Frost) from the light path may generate interference fringes on an

(This figure shows

the case of BX)

Outline of LSM Observation Procedures

(6) Hand switch

U-HSTR2(U-FH)

OPERATION INSTRUCTIONS

Chapters

Table of Contents