Olympus FLUOVIEW FV1000 User Manual page 503

1-3-2-1 Setting the Number of Buttons
1-3-2-2 Setting the Name
1 Editing the name of the buttons in the [Mirror Unit], [Condenser Turret] and [Filter Turret]
group boxes
2 Editing in the [Nosepiece] group box
1. Right-click the mouse on the area outside of the buttons in the group box where the
number of buttons to be displayed is changed. The pop-up menu as shown below
appears. Select "Hole Count" and select the number of the buttons to be displayed in
the sub-menu. Select "Default" for ordinary use.
TIP
Selecting "Nothing" disables the turret itself.
1. In the [Mirror Unit], [Condenser Turret] or [Filter Turret] group box, right-click the mouse
on the button whose name is to be edited. The pop-up menu as shown below appears.
2. Select "Edit". The [Edit] dialog box as shown below appears.
3. Enter a name into the text box and click the <OK> button.
1. In the [Nosepiece] group box, right-click the mouse on the button whose name is to be
edited. The pop-up menu as shown below appears.
Software Setup/
Setting the System Configuration
Page
MAINTENANCE
1 - 1 7