Olympus FLUOVIEW FV1000 User Manual page 189

4 Selecting REX Mask File and Setting the Laser ON/OFF
Set the REX mask file in the REX mode and Bleach mode, and the laser ON/OFF
respectively.
1. Select the [REX mode] option button in the [AOTF] group box in the [Lasers] sub-panel.
[REX mode] option
button
2. A frame to specify the REX mask file appears on the right side of the [REX mode]
option button. Right-click the mouse inside the frame to display the pop-up menu as
shown below.
Select the image to be masked in the menu.
TIP
In order to use the already saved file as a REX mask file, open the image
beforehand.
The opening method of the REX mask file is completely the same as that of an
image. For details, see section 2-3-2, "Opening Previously Saved Images" in
this manual.
3. The icon of the selected REX mask file is displayed inside the frame.
APPLIED OPERATIONS
The REX mask file displayed
in the image window is pop-
up displayed.
The icon of the selected
REX mask file is displayed
inside the frame. And the
file
observation mode are also
displayed above and under
the frame.
OPERATION INSTRUCTIONS
Page
/Image Acquisition
name and the
2 - 1 0 5