Olympus FLUOVIEW FV1000 User Manual page 102

APPLIED OPERATIONS
OPERATION INSTRUCTIONS
Page
2 - 1 8
/Image Acquisition
After the dyeing method has been set with the [Dyes] sub-panel, the ND filters
can be set using the [Ch] group box in the upper part of the [Acquire] panel.
1. In the upper part of the [Acquire] sub-panel, open the [Ch] group box for the
ND to be changed.
2. Click the <More> button.
The field as shown below is displayed below the [Ch] group box.
Display of the optimum laser and
ND value which are set
automatically according to the
selected dyeing method.
3. Vary the ND value using the Laser LED slider.
Each click of the laser ND <+> or <-> varies the laser ND value by 1%.
Each click of the laser ND slider varies the laser ND value by 5%.
One Point!
Clicking this button allows fine
adjustment of the ND value.
Clicking this field allows the ND value
to be changed on a large scale.
The ND values which are usually
used are displayed in green.
Display of the ND value set by
clicking the <+> and <-> buttons or
the field. The set ND value can also
be changed by entering its value
directly from the keyboard.