Olympus FLUOVIEW FV1000 User Manual page 123

1 Setting the observation mode
2 Setting the observation line
3 Setting the number of scans
4 Acquiring image
1. In the [Mode] group box in the [Acquire] panel, select the [Line] option button.
2. In the [Acquire] panel, select the XT observation mode option button.
1. A line is displayed on the image in the [Live] panel. Place the mouse pointer arrow on
the line and drag it to the position you want to observe.
1. Set the number of scans using the <
Series] sub-panel.
1. Click the <XT> button in the [Acquire] panel.
The acquired image will be displayed in the [Live] panel.
The XT observation acquires the images of the same position (line) for 2000 times
successively at the set scanning speed. For reference, the time required for the image
acquisitions is shown in the frame on the bottom left of the [Scan Speed] group box.
The number of image acquisitions (2000 times) can be changed by changing the value
in the [N] text box in the [Time Series] sub-panel.
APPLIED OPERATIONS
> or < > button in the [N] text box in the [Time
OPERATION INSTRUCTIONS
Page
/Image Acquisition
2 - 3 9