Olympus FLUOVIEW FV1000 User Manual page 319

Confocal laser scanning biological microscope

Hide thumbs Also See for FLUOVIEW FV1000:

Table of Contents

4. When the image was acquired in the multi-channel mode, select whether the LUT

intensity mapping (re-assignment) is applied to multiple channels simultaneously or to a

single channel.

To select the target channel(s), use the <Display channel switch> buttons. The histogram

of the selected channel(s) is displayed.

Example) When only the Ch1 image is displayed, the histogram of Ch1 is displayed and

mapping of only the Ch1 image is possible.

For the switching of channels, see section 2-4-3, "Switching the Display

Click the <Compute Histogram> button. A histogram appears as shown below.

APPLIED OPERATIONS

Fig. 2-88 Histogram

/Image Processing

OPERATION INSTRUCTIONS

Chapters

Table of Contents