Olympus FLUOVIEW FV1000 User Manual page 175

TIP
The speed recommended for point scan area as follows.
2 µ s(The scroll bar indicates "Fast" position. It is useful for the specimen
changes rapidly.), 10 µ s, 100 µ s(The scroll bar indicates "Slow" position. It
is useful for the specimen changes slowly.)
5. Set the time for measurement.
From the page tabs on the bottom right of the [Acuire] panel, select the [Time Series]
sub-panel.
Set the time for measurement with the <
6. Set the starting method for image acquisition.
(If you have FLUOVIEW TIME COURSE software)
For setting procedure, see "FLUOVIEW TIME COURSE software user's manual".
x
7. Click the <Pt T> button to acquire the image.
The image at the coordinates set in the [Live] panel appears in the image display area.
8. When image acquisition is completed, average values of intensity of each lines on the
image acquired would be plotted on graph window.
APPLIED OPERATIONS
> or < > button in the [Scanning] text box.
[Scanning] text box
OPERATION INSTRUCTIONS
Page
/Image Acquisition
2 - 9 1