Olympus FLUOVIEW FV1000 User Manual page 295

<Loop> button
Successive display or frame-by-frame display is repeated
in the same direction.
<Loop/Bound switch>button
<Display speed switch>button
Set the speed of successive display.
2. To switch the image to the image of another multiple sections, click the <Z/T series
switch> button then, from the displayed list of buttons, click the <XYZ series> button.
To switch the image to the image of another moment in the elapsed time, click the <Z/T
series switch> button then, from the displayed list of buttons, click the <XYT series>
button. (The icon in the <Z/T series switch> button will change to the icon of the
selected button.)
3. Display the image to be displayed at the front by using the <Display> buttons at the top
of the image window.
⋅• • •
<Display>button
Press to start display of n-slices of image from the start position to the end position
sequentially (successive display) or one by one (frame-by-frame display) or to stop
successive display.
Holding the button displays image slices in successive display and clicking it displays
image slices by advancing frame by frame
<Rabbit>button
Press for successive display of image slices without pause.
<Turtle>button
Press for successive display of image slices at an interval of 0.8 sec
<Display>button
Press to start display of n-slices of image from the end position to the start position sequentially
(successive display) or one by one (frame-by-frame display) or to stop successive display.
Holding the button displays image slices in successive display and clicking it displays image slices by
advancing frame by frame.
TIP
Click and hold the <Display> button for successive display. To stop it, click the
<Display> button again.
For frame-by-frame display, simply click the <Display> button.
APPLIED OPERATIONS
<Z/T series switch> button
<Set start position> button
When successive display or frame-by-frame display is
required, set the image with which the display should
start. ("0" is set when this button is not used.)
<Set end position> button
When successive display or frame-by-frame display is
required, set the image with which the display should
end. (Assuming that the number of images is n, "n-1" is
set when this button is not used.)
<XYZ series> button
Displays one of multiple images by selecting
it according to the multiple sections (Z).
<XYT series> button
Displays one of multiple images by selecting
it according to the time (T).
<Bound> button
Every time successive display or frame-by-frame display in a direction ends
at the start or end position, the display is restarted in the opposite direction.
/Changing the Image Display Method
OPERATION INSTRUCTIONS
Page
2 - 2 1 1