Olympus FLUOVIEW FV1000 User Manual page 65

Clicking the <Link Setting> button displays the [Link Setting] dialog box as shown
below.
Checking here links the objective in the [Nosepiece] group box
with the condenser turret.
Checking here escapes the stage or revolving nosepiece when
the objective is selected and changed in the [Nosepiece] group
box.
Checking here disengages the top lens from the light path
when the objective of ×4 or lower magnification is selected in
the [Nosepiece] group box. (BX only)
Checking here enables parfocality correction when the
objective is selected and changed in the [NosePiece] group
box.
When objective is selected in [Nosepiece] group box while this
box is checked, close shutter of incident lighting lamp first and
then, change objective lens. After change, open the shutter.
Checking here sets the TD lamp to OFF when the fluorescent
cube is selected in the [Mirror Unit].
Checking here disengages the top lens from the light path
when the fluorescent cube is selected in the [Mirror Unit]. (BX
only)
Checking here closes the shutter when the Mirror Units are
switched in the [Mirror Unit].
Checking here closes the FL shutter and engages Analyzer and
Polarizer into the light path when the TD lamp is set to ON in
the [Lamp] group box.
Click the desired check box to be checked.
Select the <Close> button to close the dialog box.
The microscope settings are automatically saved and read out when the software is
started up next time.
Getting Started FLUOVIEW
<Import Setting> button
Loads the microscope
settings already
registered to reflect it.
/Online Help
<Export
Setting>button
Saves the current
OPERATION INSTRUCTIONS
Page
1 - 4 3