Olympus FLUOVIEW FV1000 User Manual page 441

Enables or disables the
inflection point display.
Enables or disables the 3D
inflection point display.
Selects whether the ends of
the inflection points are
aligned with the coordinate
axis (when checked) or the
centers of the inflection
points are aligned with the
coordinate axis (when
unchecked).
Enables or disables the dark
shadowed 3D display of
inflection points.
Sets the inflection point
background color.
Enables or disables the chart
display inside the legend.
Sets the shape that the
cursor changes when it is
placed on the chart.
Sets the display formats
when the label display is set
to the numerical value
display or percent display.
APPLIED OPERATIONS
[Point] sub-panel
Used to set the inflection points in the chart.
[General] panel
Used to set the general items.
/Changing the Chart Display Method
Resets the background color to
the default color.
OPERATION INSTRUCTIONS
Page
Sets the width of inflection
points.
Sets the height of inflection
points.
Sets the type of inflection
points.
Sets whether or not the
inflection point borders are
displayed, and sets the color,
width and type.
Selects whether the labels
are displayed on or below the
chart.
Usually leave this box
unchecked.
Selects whether the labels
are displayed to the left or
right of the chart.
Usually leave this box
unchecked.
2 - 3 5 7