Olympus FLUOVIEW FV1000 User Manual page 506

Software Setup/
Setting the System Configuration
1-3-2-4 Finishing the setting
<Quit w/o Saving> button
<Save New Setup> button
MAINTENANCE
Page
1 - 2 0
Finishing the setting and closing the [Microscope Setup] window.
1. Click the < Save New Setup> button to save the setup and close the window.
Or click the <Quit w/o Saving> button to cancel the setup and close the window. Then
the dialog box as shown below appears. If you want to save, click the <Yes> button, if
you do not want to save, click the <No> button.
NOTE
After saving is selected in the [Microscope Setting] window, the original
setting is not returned even if the <Quit w/o Saving> is clicked in the
[FLUOVIEW Setup] dialog box.