Olympus FLUOVIEW FV1000 User Manual page 224

APPLIED OPERATIONS
Range of intensity values
mapped for each channel.
OPERATION INSTRUCTIONS
Page
2 - 1 4 0
/Saving, Opening and Shredding Images
NOTE
The objective setting can be changed even after having acquired the
image. If the objective is not set with the [Acquire] panel before image
acquisition, the analysis and measurement results of the image may be
erroneous. In such a case, set the objective again.
NOTE
When the objective setting is changed, the lengths per image pixel will be
re-calculated automatically and changed.
4. Display the [Image Fields] panel at the front. The panel as shown below appears,
where the information on the selected image is shown.
LUT status.
Acquisition parameters.
Version information.
Comment.
Changes contents of Image Field.
Fig. 2-39 [Image Fields] Panel