Olympus FLUOVIEW FV1000 User Manual page 137

3 Setting the number of scans
4 Acquiring image
<Resume> button
Restarts image acquisition at
the frame next to the frame
where
suspended.
1. Set the number of scans using the <
Series] sub-panel.
Click the <XYT> button in the [Acquire] panel.
The acquired image will be displayed in the [Live] panel.
When the built-in power supply for transmitted light illumination is used for a long period in
the XYT mode, the metallic parts may be expanded by heat, causing the focusing to be
deviated. To acquire precise image data, it is recommended to set the power switch of the
transmitted light illumination to "O" (OFF).
While acquiring an image in the XYT observation mode, clicking the <STOP SCAN> button
changes the buttons at the upper part of the [Acquire] panel as shown below. The
<Resume> button restarts image acquisition at the frame next to the frame where the
acquisition is suspended.
the acquisition is
APPLIED OPERATIONS
> or < > button in the [N] text box in the [Time
<Series Done> button
Determines
images. Once this button is
clicked, it is not possible to
append an image.
OPERATION INSTRUCTIONS
Page
/Image Acquisition
the acquired
2 - 5 3