Olympus FLUOVIEW FV1000 User Manual page 129

7 Acquiring image
<Resume> button
Restarts image acquisition at
the frame next to the frame
where
suspended.
8 Appending image
<Append Next> button
Acquires another image and appends it
to the image acquired immediately
before.
1. Click the <XZT> button in the [Acquire] panel.
The acquired image will be displayed in the [Live] panel.
While acquiring an image in the XZT observation mode, clicking the <STOP SCAN> button
changes the buttons at the upper part of the [Acquire] panel as shown below. The
<Resume> button restarts image acquisition at the frame next to the frame where the
acquisition is suspended.
the acquisition is
XZT image can be added after the image acquisition.
Immediately after acquisition of an image in the XZT observation mode, the buttons at the
upper part of the [Acquire] panel changes as shown below.
Click the <Append Next> button to append an image. An image will be acquired with the
same number of steps as the image acquired immediately before and appended to it.
Click the <Series Done> button when it is not required to append an image.
APPLIED OPERATIONS
<Series Done> button
Determines
images. Once this button is
clicked, it is not possible to
append an image.
<Series Done> button
Determines
images. Once this button is
clicked, it is not possible to
append an image.
OPERATION INSTRUCTIONS
Page
/Image Acquisition
the acquired
the acquired
2 - 4 5