Olympus FLUOVIEW FV1000 User Manual page 247

Confocal laser scanning biological microscope

Hide thumbs Also See for FLUOVIEW FV1000:

Table of Contents

Zlock [ON/OFF]

APPLIED OPERATIONS

combination.

Be careful that other

combination than the following cannot

be entered. (256, 256) (320, 240) (512,

512) (640, 480) (800, 600) (1024, 768)

(1024, 1024) (2048, 2048).

Saves all the images acquired before the

Stop&Save command is executed.

Note: The images are saved separately from

the images acquired in succeeding

Opens a new image window to display the

It sets Valid/Invalid of Z motor lock. Note that

fine tuning handle and coarse tuning handle

cannot be manually operated when Z motor is

locked. In case that manual operation is

required by releasing Z motor lock, difference

of Z stage position displayed on [Zstage] sub

panel of [Acquire] panel of FV300/500/1000

may occur. Use the handle after confirming

the moving range adequately. In case that Z

stage is controlled with use of command, lock

Z motor. Do not turn fine tuning handle of

microscope in the state that Zlock command is

turned ON as it may cause failure.

<E.g> In case that Z motor lock is required,

enter [Zlock ON].

Sets the zoom ratio.

<E.g.> Enter "Zoom 5" to set 5 to the zoom

OPERATION INSTRUCTIONS

/Protocol processor

Chapters

Table of Contents