Olympus FLUOVIEW FV1000 User Manual page 470

Appendix D Change of Default Folder for [File I/O] Panel
New default folder C
IMAGES is being
open.
OPERATION INSTRUCTIONS
Page
D - 6
7. Click the <OK> button to close the [Environment Variables] dialog box.
Now, the default folder for the [File I/O] panel will be changed from the next time you
start FLUOVIEW.
When the default folder is changed to C: IMAGES
TIP
To reset the default folder to the factory setup, enter "C: FLUOVIEW
IMAGES" in the [Value] text box.
NOTE
Do not change the setup after "FLUOVIEWIMAGES" in the [User Variables
for <username>] list box. If erroneous setting is made here, the system
will be unable to be started up.