Olympus FLUOVIEW FV1000 User Manual page 107

TIP
The moving amount assigned to the <Z stage fine adjustment> and <Z stage
coarse adjustment> buttons can be changed.
See section 1-3 in MAINTENANCE, "Setting the System Configuration" for
detailed operations.
1. Check the [Locked] check box in the [Z Stage] sub-panel.
2. While observing the image in the [Live] panel, locate the plane to be observed by
displacing the stage using the <Z stage coarse adjustment> and <Z stage fine
adjustment> buttons in the [Z Stage] sub-panel.
APPLIED OPERATIONS
OPERATION INSTRUCTIONS
Page
/Image Acquisition
2 - 2 3