Olympus FLUOVIEW FV1000 User Manual page 354

APPLIED OPERATIONS
OPERATION INSTRUCTIONS
Page
2 - 2 7 0
/Image Processing
It is possible to cut out the image and extract it by specifying arbitrary region. Image cut out
is done as follows.
<Annotate> button
1. Select [Annotate] button in tool bar.
<Rectangular> button
<Polyregion> button
2. Select either <Rectangular>, <Circle>, <Polyregion> or <Free Region> to assign clipping
area.
When option other than <Rectangular> is selected, the cut out (clipping) will be done
against rectangle that circumscribes the specified profile.
3. Follow procedures subsequent to 3 of section 2-6-6-1 and extract the image. The image
will be cut out and extracted and new image will be displayed.
One Point!
<Circle> button
<Free Region> button