Olympus FLUOVIEW FV1000 User Manual page 350

APPLIED OPERATIONS
OPERATION INSTRUCTIONS
Page
2 - 2 6 6
/Image Processing
Plural numbers of images can be appended without starting FLUOVIEW software.
1. Select <Start> button at bottom of Windows screen.
2. In case of Windows XP, select [All Programs] – [Accessories] - [Windows Explorer]
command from the [start] menu.
[Windows Explorer] command from the [start] menu. As shown below, Windows XP or
Windows 2000 Explorer will appear.
3. Double click [FVAppend.exe] in [FLUOVIEW] folder at [C:] drive. Dialog box - [Append on
New dimension] will appear.
4. In case that the same operation as the procedures described in this manual is done, the
image will be appended and a new file will be created.
One Point!
In case of Windows 2000, select [Accessories] -