Olympus FLUOVIEW FV1000 User Manual page 108

APPLIED OPERATIONS
8 Setting the Area to be Observed
The 4 buttons represent directions, and
clicking a button moves the acquired
image area in the direction indicated by the
button.
Clicking the square button on the center
returns the acquired image area to the
center.
Click a point inside the circle to change the
position of the acquired image area directly.
OPERATION INSTRUCTIONS
Page
2 - 2 4
/Image Acquisition
When the observation targets are concentrated in a narrow area or when observation of a
specific area detail is required, the image of a limited area can be selected.
Fig. 2-10 [Pan]/[Zoom] Group Box
For instance, let us assume that the observation target is deviated at the top left of the
acquired image.
With this example, the area containing the observation target can be observed using the
following procedure.
1. Increase the zoom ratio using the [Zoom] scale in the [Acquire] panel.
2. The light-blue circle to the left of the [Zoom] scale represents the field visible through
the microscope, and the blue frame indicates the acquired image area. Move the blue
frame inside the circle using the <Pan> buttons so that the desired observation targets
are displayed in the [Live] panel.
Blue frame appears.
Clicking a point in the scale area to
change the value on a large scale.
Clicking the top or bottom arrow
button allows fine adjustment of the
value.
Dragging the square knob allows the
value to be changed directly.