Olympus FLUOVIEW FV1000 User Manual page 164

APPLIED OPERATIONS
Click to increase
the acquired group
No.
Shows the group to
be acquired.
OPERATION INSTRUCTIONS
Page
2 - 8 0
/Image Acquisition
3. [Group] (which means each laser) and the <
part of each [CH] group box.
Click to decrease the
acquired group No.
4. Set the group number according to the reagent in use with the <
This setting is not required if the desired number is already displayed.
TIP
Image acquisition starts with the smallest group number set.
To prevent unwanted color fading, it is recommended to acquire the image
NOTE
from the reagents with longer wavelengths.
5. Click the <Seq. Once> button to acquire the image.
6. When transmitted observation is also attempted, the [FLUOVIEW] dialog box and the
[Lasers] sub-panel appear to specify the laser type which has not been specified yet.
Fig. 2-24 [FLUOVIEW] Dialog Box
> or < > buttons appear on the lower
> or < > buttons.