Olympus FLUOVIEW FV1000 User Manual page 498

Software Setup/
Setting the System Configuration
[Lasers Installed] check box
Select and check the lasers to be used with the
FLUOVIEW application.
[Multi Lines] check box
Check when using Multiline Ar
laser, then the scale appears to
the right
[Lasers] icon
[Detail Setting] button
[Laser Intensities at Startup] group box
Set the laser intensities when starting up the FLUOVIEW application.
[User default intensities] option button
Select to use the default intensity set in the [Default Laser Intensity]
scale above.
[Use most recent intensities] Option button
Set to use the intensity that was used in the last observation.
[Name] drop down list
Select laser name. The name can
be also input from the keyboard.
[Text ] button
Set color of characters to display
laser intensity.
[Background] button
Set background color
of laser intensity
display.
Check this box if dedicated AOTF is not
equipped to the laser unit selected from
drop down list of [Name].
MAINTENANCE
Page
1 - 1 2
10. Click the [Lasers] icon in [Hardware Settings] to display the [Lasers] panel in the front of
position.
Set the lasers to be used and set its default intensity.
11. Click the [Detail Setting] button to display [Laser Setting] dialog box.
[Default Laser Intensity] scale
Set the initial ND filter value at the start
of the FLUOVIEW application.
Appears when checking the
[Multi Lines] check box.
The laser wave length is popped
up when placing the mouse
pointer onto the text box.
Input laser wavelength to
be displayed in pop up
dialog in laser intensity
display.
This value is utilized to
determine filter setting in
accordance
and it does not need to
change usually.
with dye,