Olympus FLUOVIEW FV1000 User Manual page 402

APPLIED OPERATIONS
OPERATION INSTRUCTIONS
Page
2 - 3 1 8
/Viewing Images Following the Progress of Time
4. Click the <Set start position> button. (If the start position is not set, image No. 0
becomes the start image automatically.)
5. Display the image slice to end the successive display by using the <Display> button at
the top of the image window.
6. Click the <Set end position> button. (If the end position is not set, image No. n-1,
assuming that the number of images is n, becomes the start image automatically.)
7. Click the <Display> button. The images will be displayed successively from the start
position to the end position.
To stop the successive display, click the <Stop> button again.