Battery Installation And Replacement Procedures; Battery Installation Procedure - Fuji Electric Alpha7 VV User Manual

11.2 Battery Installation and Replacement Procedures

11.2.1 Battery Installation Procedure (Amplifier models: RYT□□□
□7-VV2)
Install the battery using the following procedure.
[1]
Unused
battery
[2]
Used battery
[3]
CN4
CHAPTER 11 ABSOLUTE POSITION SYSTEM
Encoder cable
with a battery
Unused battery
Battery Installation and Replacement Procedures
Prepare an unused battery.
Open the battery case of the encoder cable and
remove the old battery from the connector if it's
inside.
Connect the unused battery to connector CN4.
11
11-3