Pa2_94 Response Time (For Modbus); Pa2_95 Communication Time Over Time (For Modbus); Pa2_97 Communication Protocol Selection - Fuji Electric Alpha7 VV User Manual

CHAPTER 4 PARAMETER

PA2_94 Response time (for Modbus)

PA2_95 Communication time over time (for Modbus)

No.
94 Response time
95 Communication time over
Enter the response time of the servo amplifier.
Enter the response time and communication time-over time when necessary.
For details, refer to "CHAPTER 13
4

PA2_97 Communication protocol selection

No.
Communication protocol
97
selection
Select either the PC Loader protocol or Modbus RTU communications.
The factory shipment setting is "0" (PC Loader protocol). To use Modbus RTU communications, do not
fail to change to "1."
4-96
Extended Function Setting Parameters
Name
0.00 to 1.00 [s]
0.00 [s]...No detection
0.01 to 9.99 [s]
MODBUS RTU COMMUNICATION"
Name
0: PC Loader protocol
1: Modbus RTU
Setting range
Setting range
Default
Change
value
0.00 Always
0.00 Always
Default
Change
value
0 Always