Installation And Mounting - Fuji Electric Micro Control X Instruction Manual

3. Installation and Mounting

PXF5
8.7
48
Water proof
packing
* When using the parameter loader with PXF being mounted
Terminal screw
Terminal block is not attached to unused terminals
(from terminal 13 to 24) depending on model.
Installing multiple controllers
+0.6
45
0
50 or more
Panel cut dimensions should also meet the above dimensions after the panel is coated.
Cautions when Close Fit Mounting:
keep a clearance of at least: 30 mm on the both sides, 50 mm below, 30 mm above.
Caution
Cautions when wiring:
If with terminal cover
72.2
57
Terminal cover
2
(Option)
MTG. Fixture
*
Panel
1-12 13-24 25-36
Rear view
Close mounting in horizontal direction (n units)
Horizontally close mounting does not meet
NEMA4X/IP66 (front waterproof specification),
because packing cannot be used in this mounting.
+0.8
(48 × n - 3)
0
PXF9
96
Terminal screw
- 3 -
If with terminal cover
72.2
8.7 57
2
MTG. Fixture
Water proof
packing
Panel
* When using the parameter loader with PXF being mounted
1-12 13-24 25-36
Rear view
Terminal block is not attached to unused terminals
(from terminal 13 to 24) depending on model.
Installing multiple controllers
+0.8
92
0
100 or more
Terminal cover
(Option)
*