Installation - Fuji Electric FRENIC-EcoPAK Instruction Manual

Non-bypass panels
Table of Contents

Advertisement

Installation

CAUTION
The
panel should be located indoors:
FRENIC-EcoPAK
Away from flammable or combustible liquids, gases, and other materials
Away from sources of dust, metal shavings, or other particulate material
Away from liquids, spray, or mist
Away from sources of heat
Away from direct sunlight
Where the ambient temperature will remain between -10°C (14°F) and 40°C
(104°F)
Wall-mount panels must be mounted on a non-flammable heat-resistant surface that is
capable of supporting the weight of the panel.
Refer to the dimensional drawing that shipped with the panel for required clearances.
Routing of field wiring should be planned in coordination with choosing a mounting
location.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Page 5 of 22

Advertisement

Table of Contents
loading

Table of Contents