Station No Mode - Fuji Electric Alpha7 VV User Manual

CHAPTER 6 KEYPAD

6.5 Station No Mode

In the station no mode, the station no of the servo amplifier is displayed and a new station no can be
entered.
Press the [MODE/ESC] key until [
least one second to display data.
By pressing and holding down the [SET/SHIFT] key for one second or longer while the station No. is
displayed, the station No. (parameter PA2_72) can be edited.
Refer to "6.7 Parameter Edit Mode" for details on the editing method.
An_01
An_01
SET
SET
6
(1 sec. or over) (1秒以上)
A0001
4
SET
SET
(1秒以上)
(1 sec. or over)
A0001
Editing screen
 The station No. (PA2_72) can be changed.
 See "■ Display and editing" in "6.7 Parameter Edit Mode".
* Changes to station No. are valid after turning the power off and on again.
6-26
Station No Mode
An_01
: Station no
ESC
ESC
トグルエラーまたは
ESC 位置指令タイムアップ
ESC
点滅
Flashing
] is displayed, and press and hold the [SET/SHIFT] key for at
A_001
Communication timeout