Body Component Removal; Lower Seat Base Removal; Hood Removal; Front Bumper Removal - Polaris RANGER XP 900 2018-2019 Service Manual

BODY / FRAME

BODY COMPONENT REMOVAL

LOWER SEAT BASE REMOVAL

1. Lift up on the back of the seat to disengage the seat
pin from the rubber grommet.
2. With the seat sitting vertically, lift the seat up to
remove the seat tabs from the slots on the frame.

HOOD REMOVAL

1. Turn each 1/4 turn latch 90 degrees to unlock the
hood.
2. Lift up the hood between the locks and slide hood
forward to disengage the front of the hood from the
front fascia.
10.28

FRONT BUMPER REMOVAL

1. Remove the two fasteners (A) retaining the bottom of
the bumper to the frame.
2. Remove the two fasteners (B) retaining the top of the
bumper to the frame.
3. Carefully pull the bumper straight out to remove it
from the vehicle.

FRONT FASCIA REMOVAL

1. Remove the hood. Refer to "Hood Removal"page
10.28 procedure.
2. Disconnect both front headlights at the bulbs. Refer
to "Headlight Bulb Replacement"page 11.21
procedure.
3. Remove the two fasteners (C) retaining the front
fascia to the upper radiator brackets.
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.