Body Component Removal; Seat / Storage Trays; Front Bumper / Grill; Foot Pads / Corner Panel / Side Panel - Polaris RANGER EV 2015 Service Manual

BODY / STEERING / SUSPENSION

BODY COMPONENT REMOVAL

SEAT / STORAGE TRAYS

1. Lift rear edge of seat to release the retainer
2. Rotate rear of seat upward until the front hinge
can be released from the retaining bracket.

FRONT BUMPER / GRILL

1. Unlatch the hood and disconnect the head lamp
harnesses. Remove the two pivot screws retaining
the hood and remove the hood from the bumper.
2. Remove the three bolts
the bumper.
3. Remove the two fasteners
upper portion of the bumper.
4. Carefully remove the bumper from the vehicle.
4.12
q
.
w
from the lower portion of
q
from each side of the
FOOT PADS / CORNER PANEL / SIDE
PANEL
1. FRONT - Remove the lower T27 Torx-head screws
w
retaining the foot pads.
2. Remove the two push rivets retaining the front fender
and remove the fender from the vehicle.
3. Repeat this procedure to remove the other front
fender.
4. REAR - Remove the lower T27 Torx-head screws
retaining the foot pads.
5. Remove the three T27 Torx-head screws retaining
the rear panel.
6. Repeat this procedure to remove the other rear
fender.

CARGO BOX REMOVAL

1. Remove the screw
the frame on both sides.
9926595 R01 - 2015-2016 RANGER EV Service Manual
q
that secures the hinge pin to
© Copyright Polaris Industries Inc.