Body Component Removal; Lower Seat Base; Front Bumper; Fenders / Foot Pads - Polaris RANGER ETX 2015 Owner's Manual

BODY / FRAME

BODY COMPONENT REMOVAL

LOWER SEAT BASE

1. Lift up on the seat base to disengage the seat from
the rubber grommets
2. Pull the seat base forward to disengage the rear tabs
and remove the seat base from the vehicle.

FRONT BUMPER

1. Unlatch the hood and disconnect the head lamp
harnesses. Remove the two pivot screws retaining
the hood and remove the hood from the bumper.
2. Remove the three bolts from the lower portion of the
bumper.
3. Remove the two fasteners from each side of the
upper portion of the bumper.
4. Carefully remove the bumper from the vehicle.
10.16
q
.
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual

FENDERS / FOOT PADS

1. FRONT - Remove the lower T27 Torx-head screws
retaining the foot pads.
2. Remove the two push rivets retaining the front fender
and remove the fender from the vehicle.
3. Repeat this procedure to remove the other front
fender.
4. REAR - Remove the lower T27 Torx-head screws
retaining the foot pads.
5. Remove the three T27 Torx-head screws retaining
the rear panel.
6. Repeat this procedure to remove the other rear
fender.
© Copyright Polaris Industries Inc.