Concluding Steps - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

Figure 192: Correct position of securing clips
I
To improve the contact of the memory module perform the following
steps:
Ê Eject the memory module again by pressing out the securing clips at
each end of the memory slot.
Ê Press down on the memory module until the securing clips snap into
the cutouts at each end of the module.
Ê Check if all securing clips are in the correct position (see figure 192).

10.2.4 Concluding steps

"Reassembling" on page 57
Ê
"Connecting the power cord" on page 63
Ê
"Switching on the server" on page 66
Ê
"Resuming BitLocker functionality" on page 98
Ê
RX2530 M4
Upgrade and Maintenance Manual
Main memory
283