Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual page 374

System board and components
Ê To turn off BitLocker and decrypt the volume, click Turn Off BitLocker,
and then click Decrypt the volume.
I
Decrypting the volume may be time-consuming. By decrypting the
volume, all of the information stored on that computer is decrypted.
For more information on how to disable BitLocker drive encryption,
see the Microsoft Knowledge Base.
See the Fujitsu web pages for more details.
Ê Disable TPM in the system board BIOS. Proceed as follows:
Ê Switch on or restart your server.
Ê As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
Ê Select the Advanced menu.
Ê Select the Trusted Computing submenu.
Ê Set the TPM Support and TPM State settings to Disabled.
Ê Save your changes and exit the BIOS.
I
For information on how to access the BIOS and modify settings, see
the corresponding BIOS Setup Utility reference manual.
"Suspending BitLocker functionality" on page 77
Ê
"Shutting down the server" on page 49
Ê
"Disconnecting the power cord" on page 50
Ê
"Getting access to the component" on page 52
Ê
16.3.2.2 Removing the TPM
Ê Remove all riser modules, see section
page 219.
Ê If applicable, remove the OCP module, see section
module" on page
"Removing the defective system board" on page 402
Ê
Ê Lay the system board on a soft, antistatic surface with its component side
facing down.
374
215.
Upgrade and Maintenance Manual
"Expansion cards and riser cards" on
"Removing the OCP
RX2530 M4