Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual page 321

Ê Connect the two control cables from the LC device to the system board, see
figure 211 on page
– Pump 1 to connector LC1
– Pump 2 to connector LC2
Ê Install the slot bracket with the tubes in riser module 2, see section
an expansion card" on page
Figure 230: Installing the riser module 2 with the tubes
Ê Install the riser module 2, see section
RX2530 M4
306:
221.
Upgrade and Maintenance Manual
Liquid cooling (LC)
"Installing a riser module" on page
"Installing
68.
321