Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual page 313

Figure 220: Slot bracket with tubes
Ê Remove the slot bracket with the tubes, see section
expansion card" on page
Ê Disconnect the two control cables from the system board, see figure
page 306.
Figure 221: Removing the captive screws of the CPUs
Ê Pull up the tube (see arrow) to get access to the screws 2 and 3.
Ê Remove the four captive screws for CPU 1 in a crossover pattern (4 to 1).
Ê Remove the four captive screws for CPU 2 in a crossover pattern (4 to 1).
RX2530 M4
231.
Upgrade and Maintenance Manual
Liquid cooling (LC)
"Removing an
211 on
313