Installing The Lc Device - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

Installing the CPU frame on the heat sink
Figure 227: Installing the CPU frame on the heat sink (B)
Ê Place the CPU frame onto the heat sink of the LC device.
I
Ensure that you position the CPU frame in the right position. There is
only one position which fits.
Ê Press down the CPU frame (see arrows).
The frame must click into place (see circles).

12.2.5 Installing the LC device

Ê If applicable, install the memory spacers, see section
spacer" on page
RX2530 M4
332.
Upgrade and Maintenance Manual
Liquid cooling (LC)
"Installing a memory
319