Installing Additional Hdd/Ssd Modules; Concluding Steps - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

Ê If an ODD has been removed, install the ODD again, see section
the ODD" on page

7.4.14.4 Installing additional HDD/SSD modules

Ê Remove the dummy locks, see section
dummy module" on page
Ê Insert additional HDD/SSD modules, see section
HDD/SSD modules" on page

7.4.14.5 Concluding steps

"Reassembling" on page 57
Ê
"Connecting the power cord" on page 63
Ê
"Switching on the server" on page 66
Ê
Ê Update the system information of your server using the Chassis ID Prom
Tool, see section
corresponding system name.
"Performing a RAID array rebuild" on page 99
Ê
RX2530 M4
Hard disk drive (HDD) / solid state drive (SSD)
336.
156.
156.
"Using the Chassis ID Prom Tool" on page
Upgrade and Maintenance Manual
"Removing a 2.5-inch HDD/SSD
"Installing 2.5-inch
"Installing
103. Select the
191