Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual page 402

System board and components
Ê Remove all riser modules, see section
page 219.
Ê If applicable, remove the OCP module, see section
module" on page
Ê If applicable, remove the iRMC microSD card, see section
iRMC microSD card" on page
Ê If applicable, remove all M.2 SSDs, see section
page 387.
Ê If applicable, remove the Dual microSD 64GB Enterprise, see section
"Removing the Dual microSD 64GB Enterprise" on page
16.7.1.2 Removing the defective system board
Ê Disconnect all cables from the system board.
Figure 300: Bolts for OCP modules
Ê Remove the four OCP bolts (see circles).
402
215.
381.
USB 3.0
Slot riser card / slot 4 (CPU 2)
USB 3.0
Management
LAN
Upgrade and Maintenance Manual
"Expansion cards and riser cards" on
"Removing the OCP
"Removing the M.2 SSD" on
Slot 4
Slot OCP module
iRMC
S5
"Removing the
394.
PC
Po
YE
PCIe
Port 0
RED
Micro
SD
M.2
SSD1
RX2530 M4