Installing An Fbu In A 3.5-Inch Hdd Chassis; Preliminary Steps - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

Expansion cards and backup units
9.6.2

Installing an FBU in a 3.5-inch HDD chassis

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH1 / (+) No. 1 screw driver (for installing TFM
EP400i/EP420i)
– Phillips PH2 / (+) No. 2 screw driver (for removing/installing riser
card)
I
The riser holder of riser module 3 has to be exchanged with a riser holder
with shoulder screw caps (included in FBU kit).
9.6.2.1

Preliminary steps

"Shutting down the server" on page 49
Ê
"Disconnecting the power cord" on page 50
Ê
"Getting access to the component" on page 52
Ê
Ê Remove the riser module 3, see section
page 67.
258 Upgrade and Maintenance Manual
Hardware: 15 minutes
"Handling riser modules" on
RX2530 M4